Products

Deepstar Subsea can provide a product suitable for a wide range of subsea or topside applications, 
our aim is to provide a cost-effective solution that is tailored to client requirements.

57-0940 - 4'' 2500# Floating Ball Valve Monoblock With Twin Stem Gearbox.jpg

Subsea Ball Valves

Deepstar Subsea Ball Valves can be of either the Floating or Trunnion design, available in various sizes and pressure classes.

Valves are manufactured from a range of Subsea suitable materials and can be used for Temporary or Permanent service depending on material selection.

Soft and metal seated versions, multiple configurations with a wide variation of operators and end connections available.

4'' Hydraulic Stab.jpg

Subsea Stab Connection Systems

Deepstar Subsea Hot Stabs & Receptacles provide a means of transferring fluid subsea. They are mainly used for installation, intervention, and completion purposes on subsea well head components.

Deepstar Subsea Stab Connection System are available in various sizes and pressure classes.

Manufactured from a range of Subsea suitable materials and can be used for Temporary or Permanent Service depending on material selection.

57-1327 - 4'' 1500# Swing Check Valve With Fig 1002 & Wing Nut.jpg

Subsea Check Valves

Deepstar Subsea Check Valves available in various sizes and pressure classes.

Check Valves are manufactured from a range of Subsea suitable materials and can be used for Temporary or Permanent service depending on material selection.

High%20Pressure%20Panel%201_edited.jpg

Subsea Control Panel & Manifold Systems

Deepstar Subsea Control Panels are designed to meet customer requirements, compact designed manifolds are used where possible.

Deepstar Subsea can supply systems combining stab assemblies, hydraulic circuitry, electrical connectors, ball valves and needle valves with R.O.V. Interfaces.

Pig Lock.jpg

Pig Lock Systems

Pig lock / stop systems are installed on the outside of the pipework, the pig lock incorporates a stop pin which protrudes into the bore of the pipe work and holds the pig in place.


When the pig is required to be released the pin can be retracted by using the ROV or diver friendly mechanical interface.


Pig lock / stop can also be used as a safety feature to prevent pigs being accidently fired.

Stab Plate.jpg

Stab Plates & Multi-Port Connection Systems

A range of Stab Plate & Multi-Port connection systems are available these operate under the same principle as the Hot Stabs but allow multiple connections to be engaged upon a single operation, these can be designed around customer requirements.

pump.jpg

Subsea Pumps & Pressurisation Assemblies

The system allows the R.O.V. To connect its hydraulic power supply to the subsea pressurising pump. The pump and drive have their own subsea compensating system.


The pump is a robust design used in deep water projects for over 10 years. Pump output flow and pressure is dependent on power available from the R.O.V.

torque tool 2.jpg

Torque Tool

The Deepstar Subsea API 17H/D Torque Tool is manufactured to comply with Class 1-4 Rotary Torque Interfaces as described in ISO 13628-8:2002 Figures 14 & 18, Remotely Operated Vehicle (ROV) Interfaces on Subsea Production Systems.


The Torque Tool has a maximum torque of 2700Nm and can be designed to suit ROV or Diver intervention.

 

Tel: +44(0)191 428 6770

Fax: +44(0)191 428 6771

1 Henson Close, South Church Enterprise Park, Bishop Auckland, DL14 6WA, England

  • Google Places
  • LinkedIn

©2020 by Deepstar Subsea Limited.